N8794V Bellanca 17-30A accident

NTSB SEA08LA068 · 2008-02-02 · Mukilteo, WA · near KPAE

Docket — crew, injuries and powerplant

Summary

While the pilot was on short-final for a touch-and-go landing, the airplane's engine lost all power. Because he was at such a low altitude, he did not have time to go through a complete restart procedure, so after switching fuel tanks, he aligned the airplane to land on a paved road that was under his approach path. While attempting to land on that road, the airplane clipped a power line and descended into the surface of the road. An inspection of the engine, fuel system, and air induction system did not reveal any system or component anomaly that would have prevented the engine from producing rated horsepower. Both the fuel tank that was selected prior to the power loss, and the fuel tank that was selected after the power loss contained sufficient fuel to maintain operation of the engine. Fuel was also found in the fuel manifold valve. The reason for the loss of power was not determined.

Full narrative

On February 2, 2008, about 1230 Pacific standard time, a Bellanca 17-30A, N8794V, collided with a power line during an attempted forced landing at Snohomish County Airport (Paine Field), Mukilteo, Washington. The commercial pilot, who was the sole occupant of the airplane, received serious injuries, and the airplane, which was owned and operated by the pilot, sustained substantial damage. The local 14 Code of Federal Regulations (CFR) Part 91 personal pleasure flight, which departed the same airport about 15 minutes prior to the accident, was being operated in visual meteorological conditions. No flight plan had been filed. There was no report of an ELT activation.

According to the pilot, the airplane's engine lost all power while he was on short-final for a touch-and-go landing. Because he was at such a low altitude, he did not have time to go through a complete restart procedure, so after switching fuel tanks, he aligned the airplane to land on a paved road that was under his approach path. While attempting to land on that road, the airplane clipped a power line near the edge of the road. After hitting the power line, the airplane rolled to a steep angle of bank, and descended into the surface of the road.

The engine, fuel system, and air induction system underwent a post-accident teardown inspection. That inspection did not reveal any system or component anomaly that would have prevented the engine from producing rated horsepower. In addition, both the fuel tank that was selected prior to the power loss, and the fuel tank that was selected after the power loss contained sufficient fuel to maintain operation of the engine. Fuel was also found in the fuel manifold valve, and the use of water detection paste determined that there was no water present in the valve.

Probable cause

Loss of engine power while on final approach for undetermined reasons. Contributing to the accident was a power line. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Serious
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
20
Wind speed (kt)
5
Temperature (F)
37
Nearest airport
Paine Field
Distance from field
2.0
Airport elevation
190

Aircraft

RegistrationMakeModelDamageFAR part
N8794V Bellanca 17-30A SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR pattern final Loss of engine power (total) defining Cruise
2 Landing Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft power plant-Power plant-(general)-Not specified cause
Environmental issues-Physical environment-Object/animal/substance-Wire-Contributed to outcome - F cause
Not determined-Not determined-(general)-(general)-Unknown/Not determined cause