N107MA Cessna 172SP accident
NTSB NYC08CA118 · 2008-03-02 · Lincoln Park, NJ · near N07
Docket — crew, injuries and powerplant
Summary
The certificated flight instructor (CFI), of the Cessna 172SP, stated that the purpose of the dual flight was local air work practice, followed by takeoff and landing practice. After one high approach that terminated in a go-around, then a successful landing, the student pilot departed and positioned the airplane at a higher altitude than normal on the final approach. The CFI took the controls and demonstrated a sideslip maneuver to the student. Once the airplane lost some altitude, the CFI "…turned over the controls to the student and asked him to land the airplane." The touchdown speed was higher than normal, so the CFI queried the student whether the power was reduced, then instructed him to apply aerodynamic braking. The airplane did not appear to be slowing, so the CFI attempted to go around. He applied power and pulled back on the yoke in an attempt to take off, then saw the airport perimeter fence approaching, and felt a "jolt". The left main landing gear impacted the airport perimeter fence off the departure end of runway 1, then the airplane impacted a guardrail, and came to rest inverted on an adjacent road. The tailcone separated from the fuselage just aft of the cargo compartment. Neither pilot was injured. The CFI reported that there were no mechanical malfunctions of the airplane prior to the accident.
Full narrative
According to the certificated flight instructor (CFI), of the Cessna 172SP, the purpose of the dual flight was local air work practice, followed by takeoff and landing practice. After one high approach that terminated in a go-around, then a successful landing, the student pilot departed and positioned the airplane at a higher altitude than normal on the final approach. The CFI took the controls and demonstrated a sideslip maneuver to the student. Once the airplane lost some altitude, the CFI "…turned over the controls to the student and asked him to land the airplane." The touchdown speed was higher than normal, so the CFI queried the student whether the power was reduced, then instructed him to apply aerodynamic braking. The airplane did not appear to be slowing, so the CFI attempted to go around. He applied power and pulled back on the yoke in an attempt to take off, then saw the airport perimeter fence approaching, and felt a "jolt". The left main landing gear impacted the airport perimeter fence off the departure end of runway 1, then the airplane impacted a guardrail, and came to rest inverted on an adjacent road. The tailcone separated from the fuselage just aft of the cargo compartment. Neither pilot was injured and the CFI reported they had no mechanical difficulties with the airplane prior to the accident.
Probable cause
The certificated flight instructor's delayed decision to go-around. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 310
- Wind speed (kt)
- 11
- Temperature (F)
- 37
- Nearest airport
- Lincoln Park
- Distance from field
- 0.0
- Airport elevation
- 182
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N107MA | Cessna | 172SP | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 3 | Landing-flare/touchdown Abnormal runway contact | Cruise |
| 4 | Approach-VFR go-around Collision during takeoff/land defining | Cruise |