N160KC McDonnell Douglas 600N accident

NTSB CHI08CA098 · 2008-03-26 · Waverly, OH · near EOP

Docket — crew, injuries and powerplant

Summary

The helicopter was being operated as a corporate/executive flight when it received substantial damage during a hard landing. The pilot had been demonstrating inputs needed to control the helicopter to the passenger. He was demonstrating a normal approach to a hover by talking through all the control inputs during a visual approach. The tail boom separated from the fuselage during the hard landing.

Full narrative

The helicopter was being operated as a corporate/executive flight when it received substantial during a hard landing. The pilot had been demonstrating inputs needed to control a helicopter to the passenger. The pilot was demonstrating a normal approach to a hover by talking through all the control inputs during a visual approach. The tail boom separated from the fuselage during the hard landing.

Probable cause

The pilot's improper flare. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Wind direction
0
Nearest airport
Pike County Airport
Distance from field
5.0

Aircraft

RegistrationMakeModelDamageFAR part
N160KC McDonnell Douglas 600N SUBS 091

Sequence of events

#OccurrencePhase
1 Approach Loss of control in flight defining Cruise
2 Landing Hard landing Cruise
3 Landing Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Landing flare-Incorrect use/operation cause