N7711Z J&J Ultralights Sea Wing accident

NTSB NYC08CA136 · 2008-03-13 · Live Oak, FL

Docket — crew, injuries and powerplant

Summary

The student pilot of the amateur built SeaWing weight-shift control aircraft was in his first day of solo flight training. He successfully completed "a few" solo takeoffs and landings when the winds increased, which prompted him to switch to a field adjacent to the one he was using. On short final, the aircraft drifted towards trees to the right of the nominal approach path. The pilot initiated a go-around, and applied control inputs that were intended to correct the flight path to the left. The pilot's control inputs caused the aircraft to turn right, and it collided with the trees. The impact resulted in substantial damage to the aircraft, and serious injuries to the pilot. The pilot had approximately 700 hours in airplanes, and was learning to fly the accident aircraft. The pitch and directional control inputs for a weight-shift aircraft were opposite those required for an airplane. The flight instructor and student were cognizant of the potential for problems caused by the difference in required control inputs, but neither observed any tendency of the student to make incorrect inputs on any previous flights. The pilot stated that on the accident approach, he reverted to his original training, which was correct for a conventional airplane, but incorrect for the accident aircraft.

Full narrative

The student pilot of the amateur built SeaWing weight-shift control aircraft was in his first day of solo flight training. He successfully completed "a few" solo takeoffs and landings when the winds increased, which prompted him to switch to a field adjacent to the one he was using. On short final, the aircraft drifted towards trees to the right of the nominal approach path. The pilot initiated a go-around, and applied control inputs that were intended to correct the flight path to the left. The pilot's control inputs caused the aircraft to turn right, and it collided with the trees. The impact resulted in substantial damage to the aircraft, and serious injuries to the pilot. The pilot had approximately 700 hours in airplanes, and was learning to fly the accident aircraft. The pitch and directional control inputs for a weight-shift aircraft were opposite those required for an airplane. The flight instructor and student were cognizant of the potential for problems caused by the difference in required control inputs, but neither observed any tendency of the student to make incorrect inputs on any previous flights. The pilot stated that on the accident approach, he reverted to his original training, which was correct for a conventional airplane, but incorrect for the accident aircraft.

Probable cause

The student pilot's failure to maintain directional control during a go-around. Contributing to the accident was his habit interference from previously flying conventional airplanes. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Serious
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
340
Wind speed (kt)
5
Temperature (F)
57
Nearest airport
NONE
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N7711Z J&J Ultralights Sea Wing SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR go-around Loss of control in flight defining Cruise
2 Approach-VFR go-around Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Environmental issues-Physical environment-Object/animal/substance-Tree(s)-Not specified factor
Personnel issues-Experience/knowledge-Experience/qualifications-Total experience w/ equipment-Student pilot - F cause