N1020Q Hughes 269A accident
NTSB DFW08CA120 · 2008-04-27 · Lincoln, NE
Docket — crew, injuries and powerplant
Summary
The commercial rated pilot was practicing a steep approach in a single-engine helicopter, when she flared too low to the ground and the tail rotor struck the ground. Subsequently, the tail rotor drive shaft failed and the pilot was unable to maintain control of the helicopter. The rear portion of the right skid contacted the ground and the helicopter rolled over on to its side. Examination of the helicopter revealed it sustained substantial damage to the mast, tail boom, and the right skid was torn from the fuselage.
Full narrative
The 35-year-old commercial rated pilot was practicing a steep approach in a single-engine helicopter, when she flared too low to the ground and the tail rotor struck the ground. Subsequently, the tail rotor drive shaft failed and the pilot was unable to maintain control of the helicopter. The rear portion of the right skid contacted the ground and the helicopter rolled over on to its side. Examination of the helicopter revealed it sustained substantial damage to the mast, tail boom, and the right skid was torn from the fuselage.
Probable cause
The pilot's failure to properly execute a steep approach, which resulted in a tail strike and a loss of control. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Ceiling (ft)
- 0
- Wind direction
- 0
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N1020Q | Hughes | 269A | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Maneuvering Collision with terr/obj (non-CFIT) defining | Climb |
Findings
| Finding | |
|---|---|
| Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot | cause |