N62GS Schultz Mini 500 accident
NTSB CHI08CA105 · 2008-04-06 · Batavia, OH
Docket — crew, injuries and powerplant
Summary
The pilot reported that he was air taxiing his homebuilt helicopter when the centrifugal clutch failed and the helicopter abruptly descended into the ground. The helicopter struck its right skid and then rolled onto its side.
Full narrative
The pilot reported that he was air taxiing his homebuilt helicopter when the centrifugal clutch failed and the helicopter abruptly descended into the ground. The helicopter struck its right skid and then rolled onto its side.
Probable cause
The failure of the helicopter's centrifugal clutch during hover which led to the pilot's inability to maintain control of the craft and its subsequent impact with the ground. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Ceiling (ft)
- 0
- Wind direction
- 0
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N62GS | Schultz | Mini 500 | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Maneuvering-hover Sys/Comp malf/fail (non-power) defining | Climb |
| 2 | Maneuvering-hover Collision with terr/obj (non-CFIT) | Climb |
Findings
| Finding | |
|---|---|
| Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot | cause |
| Aircraft-Aircraft propeller/rotor-Main rotor drive-Main rotor gearbox-Failure | cause |