N9111X Cessna 182D accident

NTSB CHI08CA117 · 2008-04-27 · Madison, IN · near IMS

Docket — crew, injuries and powerplant

Summary

The airplane received substantial damage when it impacted a ditch and nosed over during an aborted landing attempt after the airplane veered off runway 03. The pilot stated that during landing rollout, the airplane experienced a "pronounced" vibration from the main landing gear wheels. The pilot stated that as the airplane was slowing, it was "moving" towards the left side of the runway beyond which was a grass area. He didn't "think" he would be able to keep the airplane on the runway so he added engine power and attempted a takeoff. The airplane then entered the grass area during the takeoff roll and lifted off but was unable to stay airborne. The airplane settled back onto the grass along a 45-degree path relative to the runway and struck a ditch. Inspection of the airplane revealed that the airplane had a flat left main landing gear tire with preexisting wear that exposed the underlying threads. The pilot stated that he inspected the main landing gear but was unable to see the condition of the tires due to the wheel pants installed on the landing gear. The airplane firewall, both wings, and empennage were deformed.

Full narrative

The airplane received substantial damage when it impacted a ditch and nosed over during an aborted landing attempt after the airplane veered off runway 03. The pilot stated that during landing rollout, the airplane experienced a "pronounced" vibration from the main landing gear wheels. The pilot stated that as the airplane was slowing, it was "moving" towards the left side of the runway beyond which was a grass area. He didn't "think" he would be able to keep the airplane on the runway so he added engine power and attempted a takeoff. The airplane then entered the grass area during the takeoff roll and lifted off but was unable to stay airborne. The airplane settled back onto the grass along a 45-degree path relative to the runway and struck a ditch. Inspection of the airplane revealed that the airplane had a flat left main landing gear tire with preexisting wear that exposed the underlying threads. The pilot stated that he inspected the main landing gear but was unable to see the condition of the tires due to the wheel pants installed on the landing gear. The airplane firewall, both wings, and empennage were deformed.

Probable cause

The inadequate preflight inspection of the landing gear tires by the pilot, which did not identify a worn tire and resulted in a flat tire during landing touchdown. An additional cause was the directional control not possible during the landing rollout, and the improper go-around procedure by the pilot. Contributing to the accident were the landing gear wheel fairing and the ditch. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Wind direction
0
Nearest airport
MADISON MUNI
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N9111X Cessna 182D SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-landing roll Loss of control on ground Cruise
3 Landing Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Tire casing-Fatigue/wear/corrosion cause
Personnel issues-Task performance-Inspection-Preflight inspection-Pilot cause
Aircraft-Aircraft systems-Landing gear system-(general)-Not specified - F cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible cause
Environmental issues-Operating environment-Airport facilities/design-(general)-Not specified - F cause
Personnel issues-Action/decision-Action-Incorrect action selection-Pilot cause