N241PH Beech B200 accident

NTSB LAX08CA151 · 2008-05-16 · Travis AFB, CA · near SUU

Docket — crew, injuries and powerplant

Summary

The pilot said that during the landing roll, the J-hook over the landing gear handle was "clicking" repeatedly; engaging and disengaging. When this had happened in the past, he pushed forward on the yoke, and reached over and raised the flaps. This time, he inadvertently raised the landing gear. The airplane settled to the runway damaging the stringers on the bottom of the fuselage and the empennage's dorsal fin.

Full narrative

The pilot said that during landing roll, the J-hook over the landing gear handle was "clicking" repeatedly; engaging and disengaging. When this had happened in the past, he pushed forward on the yoke, and reached over and raised the flaps. This time, he inadvertently raised the landing gear. The airplane settled to the runway damaging the stringers on the bottom of the fuselage and the empennage's dorsal fin.

Probable cause

The pilot inadvertently raised the landing gear during landing roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
210
Wind speed (kt)
6
Temperature (F)
99
Nearest airport
Travis AFB
Distance from field
0.0
Airport elevation
62

Aircraft

RegistrationMakeModelDamageFAR part
N241PH Beech B200 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Landing gear not configured defining Cruise

Findings

Finding
Personnel issues-Action/decision-Action-Incorrect action performance-Pilot cause