N98KC Cessna 210E accident

NTSB SEA08CA176 · 2008-08-12 · Auburn, WA

Docket — crew, injuries and powerplant

Summary

During the descent to the pilot's planned destination, the airplane's engine lost all power, and he was forced to make an emergency landing in a nearby open field. During the landing roll, the airplane impacted an irrigation pipe and nosed over onto its back. The nose over sequence resulted in the buckling of the fuselage and the crushing of the top one foot of the vertical stabilizer. A post-accident partial engine disassembly determined that the oil galley in the number four crankshaft connecting rod journal had became partially blocked by unidentified debris. That blockage resulted in insufficient lubrication of the number four connecting rod bearing, and the ultimate thermal destruction of the bearing. The destruction of the bearing resulted in direct contact between the connecting rod and the crankshaft journal, ultimately leading to the failure of the connecting rod cap due to thermal distress. The failure of the connecting rod cap resulted in the release of the connecting rod from the crankshaft journal, the internal failure of the engine, and the total loss of power.

Full narrative

During the descent to the pilot's planned destination, the airplane's engine lost all power, and he was forced to make an emergency landing in a nearby open field. Although the pilot was able to make a successful touchdown in the recently plowed field, during the landing roll, the airplane impacted an irrigation pipe and nosed over onto its back. The nose over sequence resulted in the buckling of the fuselage and the crushing of the top one foot of the vertical stabilizer. A post-accident partial engine disassembly by the Investigator-In-Charge determined that the oil galley in the number four crankshaft connecting rod journal had became partially blocked by unidentified debris. That blockage resulted in insufficient lubrication of the number four connecting rod bearing, and the ultimate thermal destruction of the bearing. The destruction of the bearing resulted in direct contact between the connecting rod and the crankshaft journal, ultimately leading to the failure of the connecting rod cap due to thermal distress. The failure of the connecting rod cap resulted in the release of the connecting rod from the crankshaft journal, the internal failure of the engine, and the total loss of power.

Probable cause

A catastrophic engine failure due to the partial blockage of the lubricating oil galley in one of the crankshaft connecting rod journals, leading to the failure of the connecting rod cap. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Distance from field
5.0

Aircraft

RegistrationMakeModelDamageFAR part
N98KC Cessna 210E SUBS 091

Sequence of events

#OccurrencePhase
1 Enroute-descent Loss of engine power (total) defining Climb
2 Emergency descent Off-field or emergency landing Descent
3 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Aircraft-Aircraft power plant-Eng oil sys (airframe furnish)-Eng oil dist (airframe furn)-Damaged/degraded cause
Aircraft-Fluids/misc hardware-Fluids-Oil-Fluid management cause
Environmental issues-Physical environment-Object/animal/substance-(general)-Not specified - F cause
Aircraft-Aircraft power plant-Engine (reciprocating)-Recip engine power section-Failure cause