N9783B accident
NTSB DFW08CA227 · 2008-09-04 · Almogordo, NM · near ALM
Docket — crew, injuries and powerplant
Summary
Following a 78-nautical-mile cross-country flight, the pilot forgot to extend the airplane's landing gear before landing. As the airplane veered off the runway the left wingtip impacted the ground resulting in substantial damage. The airplane came to rest in an upright position and the pilot was able to exit the airplane unassisted. The pilot was fatally injured four days later in a separate airplane accident; therefore, an NTSB 6120.1 form was not submitted.
Full narrative
Following a 78 nautical mile cross-country flight the pilot forgot to extend the airplane's landing gear before landing. As the airplane veered off the runway the left wing tip impacted the ground resulting in substantial damage. The airplane came to rest in an upright position and the pilot was able to exit the airplane unassisted. The pilot was fatally injured four days later in a separate airplane accident; therefore, a NTSB 6120.1 form was not submitted.
Probable cause
The pilot's failure to extend the airplane's landing gear before landing. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Night
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 70
- Wind speed (kt)
- 5
- Temperature (F)
- 68
- Nearest airport
- White Sands Regional
- Distance from field
- 0.0
- Airport elevation
- 4200
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N9783B | — | — | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing Landing gear not configured defining | Cruise |
| 2 | Landing-landing roll Runway excursion | Cruise |
Findings
| Finding | |
|---|---|
| Personnel issues-Action/decision-Action-Forgotten action/omission-Pilot | cause |
| Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Not used/operated | cause |