N941SM accident

NTSB ERA09CA071 · 2008-11-19 · Cleveland, MS · near RNV

Docket — crew, injuries and powerplant

Summary

The pilot was performing a solo flight in preparation for a commercial rating. After three uneventful touch-and-go landings, the number of airplanes in the pattern increased from two to four or five. The pilot sequenced himself between two other training flights and inadvertently failed to lower the landing gear prior to landing. Substantial damage to the wing strut crossover bulkhead resulted. The chief flight instructor for the university flight training program reported that the accident scenario will be incorporated into the curriculum for all students.

Full narrative

The pilot was performing a solo flight in preparation for a commercial rating. After three uneventful touch-and-go landings, the number of airplanes in the pattern increased from two to four or five. The pilot sequenced himself between two other training flights and inadvertently failed to lower the landing gear prior to landing. Substantial damage to the wing strut crossover bulkhead resulted. The chief flight instructor for the university flight training program reported that the accident scenario will be incorporated into the curriculum for all students.

Probable cause

The pilot's failure to lower the landing gear prior to touchdown. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
12
Wind direction
170
Wind speed (kt)
6
Nearest airport
Cleveland Municipal Airport
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N941SM — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Landing gear not configured defining Cruise

Findings

Finding
Personnel issues-Action/decision-Action-Forgotten action/omission-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Landing gear selector-Not used/operated cause