N2252U accident

NTSB CEN09CA133 · 2009-01-14 · Cement, OK

Docket — crew, injuries and powerplant

Summary

The helicopter pilot stated that he was performing a landing to a field by his workshop and was fast during the final approach. He landed hard to avoid overshooting his landing and hitting nearby power lines. The left skid dug in and the helicopter rolled over. Examination of the helicopter revealed that all three main blades were damaged, the tail rotor blades were damaged, and the tail boom was bent.

Full narrative

The pilot stated he was performing a landing to a field by his workshop and was fast during the final approach. He landed hard to avoid overshooting his landing and hitting nearby power lines. The left skid dug in and the helicopter rolled over. Examination of the helicopter revealed all three main blades were damaged, the tail rotor blades were damaged and the tail boom was bent.

Probable cause

The pilot's failure to maintain proper airspeed and descent rate during approach, which resulted in a hard landing. Contributing to the accident were the nearby power lines. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Wind direction
0
Nearest airport
Personal Landing Zone
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2252U — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Hard landing defining Cruise
2 Landing-flare/touchdown Roll over Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Airspeed-Not attained/maintained cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent rate-Not attained/maintained cause
Environmental issues-Physical environment-Object/animal/substance-Wire-Decision related to condition - F cause