N2560Q Robinson Helicopter R22 BETA accident

NTSB CEN09CA271 · 2009-04-29 · Harlingen, TX

Docket — crew, injuries and powerplant

Summary

After landing the helicopter, the pilot set the cyclic and collective friction locks and left the helicopter "running" while he and his passenger disembarked the helicopter. After being left unattended for about two minutes, the helicopter began to lift-off and subsequently impacted terrain resulting in substantial damage. The pilot reported that the friction locks were still found engaged after the helicopter impacted the terrain. Winds in the vicinity of the accident were from the southeast at 21 gusting to 30 knots. According to the manufacturer, the cyclic and collective frictions are designed to allow the pilot to remove their hands from the controls to perform the cockpit portion of the preflight and post flight operations. A "caution" in the manufacturer's pilot operating handbook states, "Never leave helicopter flight controls unattended while engine is running." In addition the pilot operating handbook has a safety notice issued November 1984, which states, "Never exit helicopter with engine running. Several accidents have occurred when pilot momentarily left their helicopters unattended with the engine running and rotors turning. The collective can creep up, increasing both pitch and throttle, allowing the helicopter to lift off or roll out of control."

Full narrative

After landing the helicopter, the pilot set the cyclic and collective friction locks and left the helicopter "running" while he and his passenger disembarked the helicopter. After being left unattended for about two minutes, the helicopter began to lift-off and subsequently impacted terrain resulting in substantial damage. The pilot reported that the friction locks were still found engaged after the helicopter impacted the terrain. Winds in the vicinity of the accident were from the southeast at 21 gusting to 30 knots. According to the manufacturer, the cyclic and collective frictions are designed to allow the pilot to remove their hands from the controls to perform the cockpit portion of the preflight and postflight operations. A "caution" in the manufacturer's pilot operating handbook states, "Never leave helicopter flight controls unattended while engine is running." In addition, the pilot operating handbook has a safety notice issued November 1984, which states, "Never exit helicopter with engine running. Several accidents have occurred when pilot momentarily left their helicopters unattended with the engine running and rotors turning. The collective can creep up, increasing both pitch and throttle, allowing the helicopter to lift off or roll out of control."

Probable cause

The pilot's decision to leave the helicopter unattended with the engine running in gusty wind conditions. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
150
Wind speed (kt)
21
Temperature (F)
90
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2560Q ROBINSON HELICOPTER R22 BETA SUBS 091

Sequence of events

#OccurrencePhase
1 Standing-engine(s) operating Miscellaneous/other defining Standing
2 Standing-engine(s) operating Dynamic rollover Standing

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-(general)-Not attained/maintained cause
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Environmental issues-Conditions/weather/phenomena-Wind-Gusts-Effect on operation factor