N1064D accident

NTSB WPR09CA319 · 2009-06-30 · Lincoln, CA · near KLHM

Docket — crew, injuries and powerplant

Summary

The pilot reported that when he entered the traffic pattern he observed the windsock indicating the wind was parallel to the runway. The pilot stated that during landing, the airplane "flared with no drift across the runway and touched down as normal." During the landing roll, the left main landing gear collapsed and separated from the airplane, and the left wing impacted the ground. Despite the pilot's control inputs, the airplane veered to the left and exited the runway, coming to a rest adjacent to the runway. The airplane sustained structural damage to the fuselage and left wing. Post-accident examination of the airplane by a Federal Aviation Administration (FAA) inspector revealed that the left main landing gear, at the point of separation, contained fractures consistent with fatigue cracks. The Safety Board issued Safety Recommendations A-01-001 and A-01-002 in March 2001, and the FAA issued an "Airworthiness Concern Sheet" in September 2007, both regarding landing gear fatigue on various Cessna airplane models with steel spring landing gear.

Full narrative

The pilot reported that when he entered the traffic pattern he observed the windsock indicating the wind was parallel to the runway. The pilot stated that during the landing the airplane "flared with no drift across the runway and touched down as normal." During the landing roll the left main landing gear collapsed and separated from the airplane, and the left wing impacted the ground. Despite the pilot's control inputs the airplane veered to the left and exited the runway coming to a rest adjacent to the runway. The airplane sustained structural damage to the fuselage and left wing.

Post-accident examination of the airplane by a Federal Aviation Administration (FAA) inspector revealed that the left main landing gear, at the point of separation, contained fractures consistent with fatigue. The Safety Board issued Safety Recommendations A-01-001 and A-01-002 in March 2001, and the FAA issued an "Airworthiness Concern Sheet" in September 2007, both regarding landing gear fatigue on various Cessna airplane models with steel spring landing gear.

Probable cause

A fatigue crack in the left main landing gear strut resulting in the collapse of the strut during the landing roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
160
Wind speed (kt)
8
Temperature (F)
82
Nearest airport
Lincoln Regional Airport
Distance from field
0.0
Airport elevation
121

Aircraft

RegistrationMakeModelDamageFAR part
N1064D — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Landing gear collapse defining Cruise
2 Landing-landing roll Runway excursion Cruise

Findings

Finding
Aircraft-Aircraft structures-(general)-(general)-Fatigue/wear/corrosion cause