N5559A accident

NTSB CEN09CA531 · 2009-08-16 · Dundee, OH

Docket — crew, injuries and powerplant

Summary

While flying at an altitude of 400 to 500 feet above the ground the engine lost power. The pilot attempted to restart the engine, but was unsuccessful. The airplane contacted an embankment during an off-airport emergency landing in a corn field, resulting in substantial damage to the airplane. The pilot reported that the outer crankshaft seal on the ignition side of the engine was not fully functional, resulting in a drop in vacuum pressure and a subsequent loss of fuel pressure. The pilot did not hold a pilot certificate.

Full narrative

While flying at an altitude of 400 to 500 feet above the ground, the engine lost power. The pilot stated he attempted to restart the engine, but was unsuccessful. The airplane contacted an embankment during an off airport emeregency landing in a corn field. The pilot reported the outer crankshaft seal on the ignition side of the engine was not fully functional resulting in a drop in vacuum pressure, and subsequently a loss of fuel pressure. The pilot did not hold a pilot certificate.

Probable cause

A total loss of engine power due to the failure of the outer crankshaft seal. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Serious
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
7
Wind direction
300
Wind speed (kt)
3
Temperature (F)
79
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N5559A — — SUBS 091

Sequence of events

#OccurrencePhase
1 Enroute Loss of engine power (total) defining Climb
2 Landing-flare/touchdown Off-field or emergency landing Cruise
3 Landing-flare/touchdown Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Environmental issues-Physical environment-Terrain-Sloped/uneven-Contributed to outcome factor
Aircraft-Aircraft power plant-Engine (reciprocating)-Recip eng rear section-Failure cause