N2292E Ayres Corporation S2R-T34 accident

NTSB ERA09LA480 · 2009-08-10 · Donalsonville, GA

Docket — crew, injuries and powerplant

Summary

According to the pilot, during landing the right main gear collapsed, and the airplane skidded off the runway to the right. Examination of the airplane found the right main gear failed at an improper weld repair on the main strut. A review of the Landing Gear Repair Manual 4-102, Page 4-73, AC 43.13-1B, showed that the repair of the landing gear should include the use of a two-piece reinforcement sleeve made of the same material and at least the same gauge as the damaged tube. The repair made on the main strut had neither, with a single bead of weld across a crack in the strut.

Full narrative

On August 10, 2009, at 1525 eastern daylight time, an Ayers Corporation S2R-T34, N2292E, registered to Kent Croom Aviation, experienced a collapse of the right main landing gear during landing roll at a private airstrip in Donalsonville, Georgia. The aerial application flight was operated by the certificated commercial pilot, under the provisions of 14 Code of Federal Regulations (CFR) Part 137, and no flight plan was filed. Visual meteorological conditions prevailed at the time of the accident. The pilot received minor injuries and the airplane sustained substantial damage. The flight originated from the same private airstrip at 1500.

According to the pilot, during landing the right main gear collapsed. The airplane skidded off the runway to the right.

Examination of the airplane by a Federal Aviation Administration inspector found the right main gear failed at an improper weld repair made on the main strut. Damage to the airplane consisted of the right main gear and engine firewall.

A review of the Landing Gear Repair Manual 4-102, Page 4-73, AC 43.13-1B, found that the repair of the landing gear should include the use of a two-piece reinforcement sleeve and made of the same material and at least the same gauge as the damaged tube. The repair made on the main strut had neither, just a bead of weld across the crack in the strut.

Probable cause

The failure of the right main gear strut due to an improper weld repair by maintenance personnel. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
240
Wind speed (kt)
5
Temperature (F)
97
Nearest airport
Private Airstrip
Distance from field
0.0
Airport elevation
160

Aircraft

RegistrationMakeModelDamageFAR part
N2292E AYRES CORPORATION S2R-T34 SUBS 137

Sequence of events

#OccurrencePhase
1 Landing-landing roll Landing gear collapse defining Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Failure cause
Aircraft-Aircraft handling/service-Maintenance/inspections-(general)-Incorrect service/maintenance cause