N6761Q Grumman Acft Eng Cor-Schweizer G-164A accident

NTSB CEN09LA574 · 2009-09-08 · Kimball, NE

Docket — crew, injuries and powerplant

Summary

The commercial pilot was performing the last pass of an aerial application flight when the engine "backfired" and surged several times. The pilot pulled the emergency fuel shut-off handle and attempted to force land in a field. The airplane overshot the intended landing area and collided with a fence before impacting terrain. A post-crash inspection of the engine revealed that an oil line fitting had been improperly installed resulting in a depletion of oil. An inspection of the airframe did not reveal any anomalies.

Full narrative

On September 8, 2009, approximately 0830 Mountain Daylight Time, a Grumman G-164A, N6761Q, was substantially damaged during a forced landing near Kimball, Nebraska. The commercial pilot was not injured. Visual meteorological conditions prevailed and no flight plan was filed for the Title 14 Code of Federal Regulations Part 137 aerial application flight. The local flight originated at Western Nebraska Regional Airport/William B. Heilig Field (KBFF), Scottsdale, Nebraska, at 0745.

According to a statement provided by the pilot, the airplane was maneuvered for the last pass of aerial application when the turbo-prop engine lost power and "backfired" several times. He added, that engine power surged several times before he pulled the emergency fuel shut-off handle and set up for a forced landing. The airplane overshot the intended landing area and collided with a fence and terrain before coming to rest in the upright position. Substantial damage was sustained to the airplane's fuselage.

An inspection of the engine by a Federal Aviation Administration inspector revealed that the engine oil supply line was disconnected. Further examination of the oil line fitting revealed signatures consistent with improper thread engagement during installation. An inspection of the airframe did not reveal any anomalies.

Probable cause

A loss of engine power due to improper installation of an oil line fitting resulting in oil depletion. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
200
Wind speed (kt)
4
Temperature (F)
59
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N6761Q GRUMMAN ACFT ENG COR-SCHWEIZER G-164A SUBS 137

Sequence of events

#OccurrencePhase
1 Prior to flight Aircraft maintenance event Standing
2 Maneuvering-low-alt flying Powerplant sys/comp malf/fail defining Climb
3 Maneuvering-low-alt flying Loss of engine power (total) Climb
4 Emergency descent Off-field or emergency landing Descent
5 Landing Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft power plant-Engine (turbine/turboprop)-Oil system-Incorrect service/maintenance cause