N555BB Yates W/Lazar M Safari Helicopter accident

NTSB CEN09CA584 · 2009-09-13 · Cedar Park, TX · near 40XS

Docket — crew, injuries and powerplant

Summary

The helicopter was approximately 400 feet above the ground on a normal straight-in landing to a paved runway. At an airspeed of 45 miles per hour the pilot heard a snap and the helicopter began to spin. The pilot entered an autorotation and said he was concentrating on just “trying to keep the helicopter as flat as possible”. The helicopter struck the trees in a nose-down attitude. There was no fuel spill and no postcrash fire. The helicopter was substantially damaged and the pilot, who was the only occupant, sustained minor injuries. The Texas State Trooper who responded said that the tail rotor gearbox was missing from the area of the main wreckage. By the next day residents in the area had found a single tail rotor blade and, several hundred feet away, they found the other tail rotor blade still attached to the tail rotor hub and tail rotor gearbox. Photographs of the separated tail rotor blade show that the skin had ripped away from all three blade grip bolt holes. A postcrash examination of the helicopter failed to reveal why the tail rotor blades and gearbox separated from the aircraft.

Full narrative

The helicopter was at approximately 400 feet above the ground on a normal straight-in landing to a paved runway. At an airspeed of 45 miles per hour the pilot heard a snap and the helicopter began to spin. The pilot entered an autorotation and said he was concentrating on just “trying to keep the helicopter as flat as possible”. The helicopter struck the trees in a nose down attitude. There was no fuel spill and no post crash fire. The helicopter was substantially damaged and the pilot, who was the only occupant, sustained minor injuries. The Texas State Trooper that responded to the accident scene said the tail rotor gear box was missing from the area of the main wreckage. By the next day residents in the area had found a single tail rotor blade and several hundred feet away they found the other tail rotor blade still attached to the tail rotor hub and tail rotor gearbox. Photographs of the separated tail rotor blade show that the skin had ripped away from all three blade grip bolt holes. A post-crash examination of the helicopter failed to reveal why the tail rotor blades and gearbox separated from the aircraft.

Probable cause

An in-flight separation of the tail rotor blades and the tail rotor gearbox for undetermined reasons. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
3000
Visibility (sm)
7
Wind direction
310
Wind speed (kt)
5
Temperature (F)
79
Nearest airport
Breakaway Park Airport
Distance from field
1.0
Airport elevation
897

Aircraft

RegistrationMakeModelDamageFAR part
N555BB YATES W/LAZAR M Safari Helicopter SUBS 091

Sequence of events

#OccurrencePhase
1 Unknown Unknown or undetermined Emergency descent
2 Approach-VFR pattern final Part(s) separation from AC defining Cruise
3 Uncontrolled descent Part(s) separation from AC Descent
4 Autorotation Loss of control in flight Descent
5 Autorotation Off-field or emergency landing Descent

Findings

Finding
Not determined-Not determined-(general)-(general)-Unknown/Not determined cause
Aircraft-Aircraft propeller/rotor-Tail rotor-Tail rotor blade-Failure factor
Aircraft-Aircraft propeller/rotor-Tail rotor-Tail rotor head-Capability exceeded factor