N74607 Robinson Helicopter R22 BETA accident

NTSB WPR10CA042 · 2009-10-31 · Marsing, ID

Docket — crew, injuries and powerplant

Summary

The flight instructor reported that, during a flight review, the pilot being reviewed was performing a pinnacle approach to landing at a selected site between 3,500 feet to 4,000 feet mean sea level. During the approach the helicopter was descending at a rate of about 400 feet per minute and a forward speed of 30 knots. The pilot stated that the helicopter was passing through translational lift and that it seemed like it was taking more power. The flight instructor called for a go-around due to the indicated airspeed and the high sink rate. The instructor stated, “Upon initiating the go-around we experienced lack of power, decreased rotor rpm, and an increased sink rate.” Both occupants reported that they pulled their collectives up to cushion the landing; however, the touchdown was hard. The helicopter tipped forward onto its nose and rolled onto its left side. The landing skids were spread and bent, the main rotor blades remained attached, but were bent, and the tail boom was bent. The flight instructor reported that there were no mechanical anomalies with the helicopter prior to the accident.

Full narrative

The flight instructor reported that during a flight review, the pilot being reviewed was performing a pinnacle approach to landing at a selected site between 3,500 feet to 4,000 feet mean sea level. During the approach, the helicopter was descending at a rate of about 400 feet per minute and a forward speed of 30 knots. The pilot stated that the helicopter was passing through translational lift and that it seemed like it was taking more power. The flight instructor called for a go-around due to the indicated airspeed and the high sink rate. The instructor stated, “Upon initiating the go-around we experienced lack of power, decreased rotor rpm, and an increased sink rate.” Both occupants reported that they pulled their collectives up to cushion the landing, however, the touchdown was hard. The helicopter tipped forward onto its nose and rolled onto its left side. The landing skids were spread and bent, the main rotor blades remained attached, but were bent, and the tail boom was bent. The flight instructor reported that there were no mechanical anomalies with the helicopter prior to the accident.

Probable cause

The pilot's failure to maintain adequate main rotor rpm during the approach and subsequent go-around and the certified flight instructor's inadequate supervision of the flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
9000
Visibility (sm)
10
Wind direction
100
Wind speed (kt)
4
Temperature (F)
48
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N74607 ROBINSON HELICOPTER R22 BETA SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Hard landing defining Cruise
2 Approach-VFR go-around Miscellaneous/other Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Prop/rotor parameters-Not attained/maintained cause
Personnel issues-Psychological-Attention/monitoring-Monitoring other person-Instructor/check pilot cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause