N515FX Bombardier Inc BD-100-1A10 accident

NTSB CEN10LA142 · 2010-02-24 · Wheeling, IL · near PWK

Docket — crew, injuries and powerplant

Summary

According to the pilot, their executive jet airplane was undergoing deicing operations following their taxi to a run up pad near runway 34 and taxiway kilo, in preparation for departure. As the deicing truck was conducting the procedure, the vehicle's boom struck the airplane's empennage causing substantial damage. The fixed base operator’s [FBO] deicing/anti-icing training guidebook states that the driver should “always know where the boom and bucket are located.” There were supervisors on duty at the airport during the deicing operation; however, no supervisor was specifically overseeing the deicing operation. The FBO’s training guidebook did not require that a supervisor oversee deicing operations.

Full narrative

On February 24, 2010, about 1020 central standard time, a Bombardier Inc. BD-100-1A10, N515FX, piloted by two airline transport pilots, sustained substantial damage when a deicing vehicle impacted the airplane during deicing operations prior to an intended departure from the Chicago Executive Airport, near Wheeling, Illinois. Both pilots and both deicing ground crewmembers were uninjured. The fractional ownership flight was conducted under the provisions of Title 14 Code of Federal Regulations Part 91, Subpart K. Marginal visual meteorological conditions prevailed at the time of the accident and an instrument flight rules flight plan was on file. The positioning flight was destined for the Chicago Midway International Airport, Chicago, Illinois.

An airport maintenance person stated he saw a Signature de-ice truck hit the horizontal stab on the right hand side (as sitting in plane). The Signature de-ice truck boom hit the tail, not the operator cab (where the de-ice operator stands). He said he saw the nose of the plane move forward, then down, and "I figured that the plane was hit." The pilot then came out of the aircraft to inspect it with Signature personnel.

According to the pilot’s accident report, the deicing operation took place following their taxi to a run up pad near runway 34 and taxiway kilo.

The fixed base operator’s [FBO] deicing/anti-icing training guidebook, under Equipment Operation, states that the deicing vehicle driver should “always know where the boom and bucket are located.” There were supervisors at the airport during the deicing operation. There was no supervisor overseeing the deicing operation. The FBO’s training guidebook did not require that a supervisor oversee deicing operations.

Probable cause

The deicing vehicle operator's not adhering to company procedures and not maintaining clearance between the vehicle's boom and the airplane's empennage during the airplane's deicing operation. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
1600
Visibility (sm)
2
Wind direction
320
Wind speed (kt)
11
Temperature (F)
27
Nearest airport
Chicago Executive Airport
Distance from field
1.0
Airport elevation
647

Aircraft

RegistrationMakeModelDamageFAR part
N515FX BOMBARDIER INC BD-100-1A10 SUBS 091K

Sequence of events

#OccurrencePhase
2 Standing Ground handling event defining Standing

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Ground crew cause
Organizational issues-Support/oversight/monitoring-Oversight-Oversight of operation-Other institution/organization factor