N8379A accident
NTSB WPR10CA243 · 2010-05-15 · Moab, UT · near CNY
Docket — crew, injuries and powerplant
Summary
The pilot was practicing landings during a proficiency check ride. He was doing a wheel landing and noticed another airplane holding short for takeoff. He tried to expedite clearing the runway at the A-4 taxiway before reaching a speed slow enough to allow for a safe exit from the runway. He hit the brakes hard and lost directional control. The airplane skidded off the runway, and the tail hit the taxiway sign. The rear fuselage and empennage sustained substantial damage.
Full narrative
The pilot was practicing landings during a proficiency check ride. He was doing a wheel landing, and noticed another airplane holding short. He stated that he tried to expedite clearing the runway at the A-4 taxiway before reaching a speed slow enough to allow for a safe exit from the runway. He hit the brakes hard; the airplane skidded off the runway and the tail hit the taxiway sign. The rear fuselage and empennage sustained substantial damage.
Probable cause
The pilot's failure to maintain directional control during the landing roll. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 0
- Wind speed (kt)
- 4
- Temperature (F)
- 55
- Nearest airport
- Canyonlands
- Distance from field
- 0.0
- Airport elevation
- 4557
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N8379A | — | — | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing-landing roll Loss of control on ground defining | Cruise |
| 2 | Landing-landing roll Runway excursion | Cruise |
| 3 | Landing-landing roll Collision with terr/obj (non-CFIT) | Cruise |