N3856D Crabtree RV6 accident
NTSB ERA10CA332 · 2010-06-25 · Sewanne, TN · near UOS
Docket — crew, injuries and powerplant
Summary
According to the pilot, after completing a local flight approximately 1 hour in duration, he returned for landing at his home airport. He then "attempted to land too fast and too high." The airplane bounced twice and veered off the side of the runway into the grass. The airplane nosed over and came to rest inverted, which resulted in substantial damage to the vertical stabilizer and rudder. The pilot reported that there were no mechanical malfunctions or failures.
Full narrative
According to the pilot, after completing a local flight approximately 1 hour in duration, he returned for landing at his home airport. He then "attempted to land too fast and too high." The airplane bounced twice and veered off the side of the runway into the grass. The airplane nosed over and came to rest inverted, which resulted in substantial damage to the vertical stabilizer and rudder. The pilot reported that there were no mechanical malfunctions or failures.
Probable cause
The pilot's improper recovery from a bounced landing. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- BKN
- Ceiling (ft)
- 5000
- Visibility (sm)
- 6
- Wind direction
- 340
- Wind speed (kt)
- 24
- Temperature (F)
- 88
- Nearest airport
- Franklin County
- Distance from field
- 0.0
- Airport elevation
- 1953
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N3856D | Crabtree | RV6 | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing Abnormal runway contact defining | Cruise |
| 2 | Landing Nose over/nose down | Cruise |
Findings
| Finding | |
|---|---|
| Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot | cause |
| Aircraft-Aircraft oper/perf/capability-Performance/control parameters-(general)-Incorrect use/operation | cause |