N72609 accident

NTSB CEN10CA387 · 2010-07-10 · Franklin, IN · near 63II

Docket — crew, injuries and powerplant

Summary

According to the pilot, as he was landing, "the airplane would not touchdown as quickly as normal" and he missed his intended landing point. The pilot determined that there was still sufficient runway to continue the landing. The airplane touched down approximately halfway down the runway. The pilot applied the brakes in order to not overrun the runway and the airplane nosed over. A postaccident examination of the airplane revealed the vertical stabilizer and rudder were bent. The pilot reported no anomalies with the airplane.

Full narrative

According to the pilot, while attempting to land on runway 18 (1,650 feet long by 75 feet wide) at a private grass airstrip, the airplane "was not settling in as quickly as normal" and the pilot missed his intended touchdown point. The pilot determined there was still sufficient runway to continue the landing. The airplane touched down approximately halfway down the runway. The pilot applied the brakes in order to not overrun the runway, and the airplane nosed over. Examination of the airplane revealed the vertical stabilizer and rudder were bent. The pilot reported no anomalies with the airplane.

Probable cause

The pilot's improper touchdown point and excessive braking, which resulted in a nose over. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
9500
Visibility (sm)
10
Wind direction
0
Temperature (F)
81
Nearest airport
Woods Field Airport
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N72609 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Landing area overshoot Cruise
2 Landing Loss of control on ground defining Cruise
3 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-(general)-Not attained/maintained cause