N5177E accident

NTSB CEN10LA457 · 2010-08-02 · Burnet, TX · near BMQ

Docket — crew, injuries and powerplant

Summary

The pilot was flying to an airport with a maintenance facility to have a tailwheel shimmy repaired. Upon arrival at the destination airport, the pilot performed a three point landing, and, during the landing roll, the rudder pedals began to “shudder violently.” The pilot was unable to control the airplane, and it exited the right side of the runway. During the runway excursion, the left wing hit the ground. Postaccident disassembly of the tailwheel revealed that the tailwheel compression spring had broken. The failure of the compression spring allowed the tailwheel to caster freely making controllability of the airplane on the ground difficult.

Full narrative

On August 2, 2010, about 0830 central daylight time, a Cessna 180B airplane, N5177E, was substantially damaged during landing at Burnet Municipal Airport (BMQ), Burnet, Texas. The private pilot was not injured. The airplane was owned and operated by a private individual under the provisions of 14 Code of Federal Regulations Part 91 as a personal flight. Visual meteorological conditions prevailed for the flight, which operated without a flight plan. The flight originated from the Llano Municipal Airport (AQO), Llano, Texas about 0700.

The pilot reported he was delivering the airplane to BMQ to have the tailwheel examined to troubleshoot tailwheel shimmy. He performed a three point landing and during rollout the rudder pedals began to “shudder violently.” The pilot was unable to control the airplane and it exited the right side of the runway. During the runway excursion the left wing hit the ground, substantially damaging the left aileron.

The tailwheel assembly was sent to a repair station by the owner and disassembled. The tailwheel compression spring (part number 3222) was found broken. Failure of the compression spring would allow the tailwheel to caster freely. The broken compression spring was not retained so an examination to determine the cause of the failure could not be performed.

Probable cause

The failure of the tailwheel compression spring, which resulted in a loss of directional control during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
72
Nearest airport
Burnet Municipal Airport
Distance from field
0.0
Airport elevation
1284

Aircraft

RegistrationMakeModelDamageFAR part
N5177E — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-landing roll Loss of control on ground Cruise
3 Landing-landing roll Runway excursion Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Nose/tail landing gear-Failure cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible cause