N9761L accident

NTSB WPR10CA400 · 2010-08-13 · Wenden, AZ

Docket — crew, injuries and powerplant

Summary

The pilot reported that just after touchdown the airplane bounced and veered to the right. The pilot applied full power and attempted a go-around; however, the airplane exited the runway environment and struck a pole. Subsequently, the airplane nosed over substantially damaging the firewall. The pilot reported no mechanical failures or malfunctions with the airframe or engine prior to the accident.

Full narrative

The pilot reported that just after touchdown the airplane bounced and veered to the right. The pilot applied full power and attempted a go-around; however, the airplane exited the runway environment and struck a pole. Subsequently, the airplane nosed over substantially damaging the firewall. The pilot reported no mechanical failures or malfunctions with the airframe or engine prior to the accident.

Probable cause

The pilot’s inadequate bounced landing recovery and failure to maintain directional control during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
230
Wind speed (kt)
3
Temperature (F)
91
Nearest airport
Wayside Inn
Distance from field
0.0
Airport elevation
1200

Aircraft

RegistrationMakeModelDamageFAR part
N9761L — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Hard landing Cruise
2 Landing-flare/touchdown Loss of control in flight defining Cruise
3 Landing-flare/touchdown Collision with terr/obj (non-CFIT) Cruise
4 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Pole-Contributed to outcome factor
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause