N226CP accident

NTSB CEN10IA535 · 2010-09-10 · Brenham, TX · near 11R

Docket — crew, injuries and powerplant

Summary

The crewmembers reported that they were still on the ground and noticed a crew alerting system (CAS) message indicating a brake failure. They decided to continue their departure, and the CAS message stayed active for the entire flight. After touchdown, the co-pilot was flying the airplane when he discovered that the brakes did not work, and the airplane began skidding when he pulled the emergency parking brake handle. The airplane was moving about 50 to 60 knots when both tires blew. While the airplane was still skidding on the runway, the nose rotated about 120 degrees to the left and the airplane exited the left side of the runway while moving sideways to the right. The right main landing gear collapsed after contacting the soft ground on the side of the runway. A postaccident examination of the brake control unit (BCU) revealed a fault on the printed circuit board that led to an open circuit for a component installed on the board. The open circuit caused the failure of the BCU and the loss of normal braking. An examination of the remaining systems revealed no anomalies.

Full narrative

On September 10, 2010, about 1252 central daylight time, N226CP, an Embraer 500 (Phenom 100) multiengine corporate jet airplane, received minor damage after a runway excursion during a landing at Brenham Municipal Airport (11R), Brenham, Texas. The pilot and co-pilot were not injured. The airplane was owned by Vader LLC, North Augusta, South Carolina, and was operated by a private individual. Visual meteorological conditions prevailed at the time of the incident and an instrument flight rules (IFR) flight plan had been filed for the 14 Code of Federal Regulations Part 91 personal flight. The cross country flight departed Tucson International Airport (TUS), Tucson, Arizona, about 0830 mountain standard time, destined for 11R.

The crewmembers reported that when the airplane was still on the ground at TUS they had a crew alerting system (CAS) message for BRK FAIL which they unsuccessfully attempted to reset. They decided to continue their departure and reported that the CAS message stayed active for the entire flight. The crewmembers also reported that the pilot was flying the airplane from the left seat for most of the flight and she conducted the global positioning system (GPS) approach to a straight-in landing on the runway. Just before landing the co-pilot took over and after touchdown discovered that he had “no brakes”. The airplane began skidding after he pulled the emergency parking brake (EPB) handle. The co-pilot reported the airplane continued to skid even after he pushed down and stowed the EPB handle.

The airplane was moving about 50 to 60 knots when both tires blew. While still skidding on the runway the nose rotated about 120 degrees to the left and the airplane exited the left side of the runway while moving sideways to the right. The right main landing gear collapsed after contacting the soft ground on the side of the runway. Both crewmembers then exited thru the cabin door.

Data from the flight data recorder (FDR) shows that the CAS message for BRK FAIL appeared when the airplane was still on the ground at TUS and before the second engine had been started. The FDR data also showed that after touchdown at 11R both wheels were rotating after the EPB handle was stowed.

The brake control unit (BCU) was removed and destructively examined. A fault was found on the printed circuit board which led to an open circuit for a component installed on the board. The open circuit caused the failure of the BCU and the loss of normal braking. An examination of the remaining systems revealed no anomalies.

The pilot reported that the incident could have been avoided if they had waited longer before using the emergency brake. The co-pilot reported that they should not have departed from TUS with the unresolved CAS message.

Probable cause

The pilots’ decision to depart with a known failed brake control unit. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Incident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
220
Wind speed (kt)
9
Temperature (F)
90
Nearest airport
Brenham Municipal Airport
Distance from field
0.0
Airport elevation
318

Aircraft

RegistrationMakeModelDamageFAR part
N226CP — — MINR 091

Sequence of events

#OccurrencePhase
1 Prior to flight Sys/Comp malf/fail (non-power) defining Standing
2 Takeoff Sys/Comp malf/fail (non-power) Takeoff
3 Landing Sys/Comp malf/fail (non-power) Cruise
4 Landing-landing roll Loss of control on ground Cruise
5 Landing-landing roll Runway excursion Cruise
6 Landing-landing roll Landing gear collapse Cruise

Findings

Finding
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Flight crew cause
Aircraft-Aircraft systems-Landing gear system-Landing gear brakes system-Failure factor