N8742 accident

NTSB ERA11CA002 · 2010-10-01 · Lake City, SC · near 51J

Docket — crew, injuries and powerplant

Summary

According to the pilot, he was back taxiing on the runway when the tailwind and runway slope allowed the airplane to gain more than normal taxi speed. As the pilot realized the airplane was approaching the end of the runway, he began to apply brake pressure to avoid running off the end of the runway. The airplane nosed over and came to rest inverted, substantially damaging the rudder. A postaccident examination of the airplane revealed no mechanical malfunctions that would have precluded normal operation.

Full narrative

According to the pilot, he was back taxing on runway 19 to depart on runway 1. The pilot stated that the tailwind and runway slope "apparently allowed the airplane to gain more than normal taxi speed." As the pilot realized the airplane was approaching the end of the runway, he began to apply brake pressure to "avoid running off the end of the runway." The airplane nosed over and came to rest inverted, substantially damaging the rudder. A post accident inspection completed by a Federal Aviation Administration Inspector revealed no mechanical anomalies. The winds reported at an airport 9 miles to the south, at the time of the accident, were from 010 degrees at 7 knots.

Probable cause

The pilot’s improper use of the brakes while taxiing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
5000
Visibility (sm)
10
Wind direction
10
Wind speed (kt)
7
Temperature (F)
73
Nearest airport
Lake City Municipal Airport
Distance from field
0.0
Airport elevation
80

Aircraft

RegistrationMakeModelDamageFAR part
N8742 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Taxi-to runway Abrupt maneuver defining Taxi
2 Taxi-to runway Miscellaneous/other Taxi

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Brake-Incorrect use/operation cause