N280JH Halbrook Rans S-6S accident

NTSB CEN11LA077 · 2010-11-17 · St. Cloud, MN · near KSTC

Docket — crew, injuries and powerplant

Summary

The pilot reported that while practicing touch-and-go landings he noticed that the nut from the forward door hinge of the left cabin door was missing. He decided to make a full stop landing to inspect further. During final approach, the door separated from the fuselage; the pilot was able to complete the landing without further incident. A postaccident examination confirmed that the forward door hinge bolt/nut assembly had backed-off during flight, which precipitated the door separating from the airplane. The airplane kit manufacturer guidance indicated that a shear stop nut was to be used in the gull-wing (upward opening) door hinge assemblies. However, the Federal Aviation Administration (FAA) advises (in Advisory Circular 43.13-1B) that self-locking nuts, such as the type used on the accident airplane door, are not recommended for use on parts subject to rotation. The FAA further advises that the use of self-locking castellated nuts with cotter pins or lockwire is a more suitable method to secure rotating parts. According to the kit manufacturer, the accident flight was the first documented instance where a door separated during flight.

Full narrative

On November 17, 2010, about 1630 central standard time, an experimental amateur-built Halbrook Rans S-6S airplane, N280JH, was substantially damaged when the left cabin door separated from the fuselage while on final approach to runway 31 at the St. Cloud Regional Airport (KSTC), near St. Cloud, Minnesota. The pilot and his flight instructor were not injured. The airplane was registered to Airflight LLC, and operated by a commercial pilot under the provisions of 14 Code of Federal Regulations Part 91. Day visual meteorological conditions prevailed for the flight, which was operated without a flight plan. The local flight departed KSTC at 1530.

The pilot reported that while practicing touch-and-go landings he noticed that the nut from the forward door hinge of the left cabin door was missing. He decided to make a full stop landing to inspect further. While established on final approach, about 1/2 mile from the runway threshold, the door separated from the fuselage. The pilot was able to complete the landing without further incident.

A postaccident investigation revealed that the door had impacted the left wing, aft fuselage, left elevator, and the left side of the rudder resulting in substantial damage. Further inspection confirmed that the forward door hinge bolt/nut assembly had backed-off during flight, which precipitated the door separating from the airplane. The airplane’s last condition inspection was completed on April 23, 2010. The airplane had accumulated 219 hours since new at the time of the accident.

The builder guidance provided by the kit manufacturer (Rans Aircraft), including the parts listing for the airplane, indicated that a 3/16-inch shear stop nut (AN3641032A) was used in the door hinge assemblies. The gull-wing (upward opening) doors are designed to be easily removed from the fuselage for open-cockpit flight. The same door and hinge design was also incorporated in other Rans models. According to the kit manufacturer, the accident flight was the first documented instance where a door has separated during flight.

According to Federal Aviation Administration Advisory Circular 43.13-1B (Acceptable Methods, Techniques, and Practices - Aircraft Inspection and Repair), the use of self-locking nuts, such as the type used on the accident airplane door, is not recommended for parts subject to rotation. Alternatively, the use of self-locking castellated nuts with cotter pins or lockwire is listed as a suitable method to secure rotating parts.

Probable cause

The airplane kit manufacturer’s recommended use of an improper nut type for securing the door hinge. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
2600
Visibility (sm)
10
Wind direction
320
Wind speed (kt)
9
Temperature (F)
32
Nearest airport
St. Cloud Regional Airport
Distance from field
1.0
Airport elevation
1031

Aircraft

RegistrationMakeModelDamageFAR part
N280JH Halbrook Rans S-6S SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR pattern final Part(s) separation from AC defining Cruise

Findings

Finding
Aircraft-Aircraft structures-Doors-Passenger/crew doors-Malfunction cause