N9237Y accident

NTSB WPR11CA142 · 2011-02-22 · North Bend, OR · near KOTH

Docket — crew, injuries and powerplant

Summary

According to the pilot, while in the process of executing a terminal instrument approach to his home airport, he transitioned from instrument meteorological conditions to visual meteorological conditions. He canceled his instrument flight rules clearance, and transitioned from the terminal instrument approach to a visual flight rules approach pattern. During this sequence of events he did not follow a written checklist, and inadvertently forgot to lower the landing gear. During the landing flare, he heard the noise caused by the wing flaps and both propellers contacting the surface of the runway, and he added power and immediately executed a go-around. He then entered a closed pattern, lowered the landing gear and repositioned the flaps, before making an uneventful landing. He said during the approach he heard the gear warning horn sounding, but he thought it was the altitude alerting system. An inspection of both the runway surface scarring and each propeller blade revealed that the tips of all six blades had been grounded down by repeated contact with the asphalt surface. He also said that the airplane did not have any system malfunctions.

Full narrative

According to the pilot, while in the process of executing a terminal instrument approach to his home airport, he transitioned from instrument meteorological conditions (IMC) to visual meteorological conditions (VMC). He therefore canceled his instrument flight rules (IFR) clearance, and transitioned from the terminal instrument approach to a visual flight rules (VFR) approach pattern. During this sequence of events, the pilot, who was not following a written checklist, inadvertently forgot to lower the landing gear. During the landing flare, the pilot heard the noise caused by the wing flaps and both propellers contacting the surface of the runway, and therefore he added power and immediately executed a go-around. The pilot then entered a closed pattern, lowered the landing gear and repositioned the flaps, before making an uneventful landing. According to the pilot, during his approach he heard the gear warning horn sounding, but he thought it was the altitude alerting system. An inspection of both the runway surface scarring and each propeller blade revealed that the tips of all six blades had been ground down by repeated contact with the asphalt surface. The pilot also said that the airplane did not have any system malfunctions.

Probable cause

The pilot's failure to lower the landing gear while on approach to landing. Contributing to the accident was the pilot's failure to follow a written checklist during the approach portion of the flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
3500
Visibility (sm)
10
Wind direction
300
Wind speed (kt)
10
Temperature (F)
45
Nearest airport
Southwest Oregon Regional
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N9237Y — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Landing gear not configured defining Cruise
2 Landing-flare/touchdown Abnormal runway contact Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Landing gear actuator-Not used/operated cause
Personnel issues-Task performance-Use of equip/info-Use of checklist-Pilot - F cause
Personnel issues-Action/decision-Action-Forgotten action/omission-Pilot cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause