N93PP accident

NTSB CEN11LA457 · 2011-06-23 · Akron, CO · near AKO

Docket — crew, injuries and powerplant

Summary

The pilot reduced power for landing because the approach was slightly high. When he added power to arrest the descent, the engine failed to respond. The airplane landed short of the runway. The impact drove the main landing gear through the right wing. Examination and functional testing of the engine revealed that the mixture control cable was disconnected from the cable housing attach clamp. The cable was reattached and the engine functioned normally with no anomalies noted.

Full narrative

On June 23, 2011, about 0915 mountain daylight time, a Beech B36TC, N93PP, impacted terrain short of the runway at Colorado Plains Regional Airport (AKO), Akron, Colorado. The pilot and passenger on board the airplane sustained minor injuries. The airplane was substantially damaged. The airplane was registered to and operated by Arizona Thunderbolts LLC, Phoenix, Arizona, under the provisions of 14 Code of Federal Regulations (CFR) Part 91 as a personal flight. Visual meteorological conditions (VMC) prevailed at the time of the accident, and no flight plan had been filed. The flight originated at Yuma (2V6), Colorado, approximately 0900 and was en route to AKO.

According to the pilot, he reduced power for landing because he was slightly high. When he added power to arrest the descent, the engine failed to respond. The airplane landed short of the runway. The impact drove the main landing gear through the right wing.

During the first functional test, the engine was started using high boost prime. When low boost was selected, the engine quit. During a second examination, it was discovered that the mixture control cable was disconnected from the cable housing attach clamp. When the mixture control was moved inside the cockpit, the cable and housing moved together. The mixture control cable was reconnected and the engine was functionally tested again. The engine operated at all power settings, from idle to 2,800 rpm. Mixture adjustments were made with no anomalies noted.

Probable cause

The mixture control cable disconnected from the cable housing attach clamp, which resutlted in the pilot's inability to add power when needed. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
180
Wind speed (kt)
13
Temperature (F)
72
Nearest airport
Colorado Plains Regional
Distance from field
0.0
Airport elevation
4716

Aircraft

RegistrationMakeModelDamageFAR part
N93PP — — SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR pattern final Loss of engine power (partial) defining Cruise
2 Approach-VFR pattern final Controlled flight into terr/obj (CFIT) Cruise

Findings

Finding
Aircraft-Aircraft power plant-Engine controls-Mixture control-Inoperative cause