N1375X accident

NTSB WPR11CA339 · 2011-07-20 · Watsonville, CA

Docket — crew, injuries and powerplant

Summary

During an aerial application flight, the pilot was spraying water on a field to wash the hopper tank for the next load of chemicals. During the second pass, the pilot attempted to clear a wire that ran perpendicular to his flight path by descending beneath it at an altitude of approximately 5 feet. The pilot reported that the outer end of one main rotor blade struck the pole and the helicopter impacted the ground and rolled over.

Full narrative

The pilot was spraying water on a field to wash the hopper tank for the next load of chemicals. On the second pass the pilot attempted to clear a wire that ran perpendicular to his flight path by descending beneath it at an altitude of approximately 5 feet. The pilot reported that the outer end of one main rotor blade struck the pole and the helicopter hit the ground and rolled over.

Probable cause

The pilot's failure to maintain clearance from a pole while maneuvering during an aerial application flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
154
Wind speed (kt)
4
Temperature (F)
73
Nearest airport
None
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N1375X — — SUBS 137

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Low altitude operation/event defining Climb
2 Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) Climb

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Pole-Response/compensation cause