N10009 Texas Helicopter Corp OH-13H/M74A accident

NTSB CEN11CA524 · 2011-07-28 · Creston, IL · near IL93

Docket — crew, injuries and powerplant

Summary

According to the pilot, he was landing the helicopter on a helicopter cart when its skid got caught on the cart and the helicopter subsequently rolled over. The pilot reported there were no mechanical malfunctions with the helicopter during the flight, and substantial damage was sustained to the helicopter tailboom when it rolled. Dynamic rollover is the tendency of a helicopter to continue rolling when the critical angle is exceeded, if one skid is on the ground, and the helicopter is pivoting around that point. Dynamic rollover is possible when a skid is caught by a projection on the surface or when landing on a slope.

Full narrative

The pilot was landing the helicopter on a helicopter cart. He said that the helicopter's skid got caught on the cart and the helicopter subsequently rolled over. There were no mechanical malfunctions with the helicopter during the flight. The helicopter sustained substantial damage to its tailboom when it rolled.

Probable cause

The pilot's failure to maintain adequate skid clearance from the helicopter cart during landing, resulting in a dynamic rollover. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
180
Wind speed (kt)
6
Temperature (F)
82
Nearest airport
Hendrickson Flying Service
Distance from field
0.0
Airport elevation
889

Aircraft

RegistrationMakeModelDamageFAR part
N10009 TEXAS HELICOPTER CORP OH-13H/M74A SUBS 137

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Dynamic rollover defining Cruise
2 Landing Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause