N540AF Hendryx Steve/Wiley Ross SUPER REBEL accident

NTSB CEN11LA588 · 2011-08-21 · La Porte City, IA

Docket — crew, injuries and powerplant

Summary

The accident flight was the third flight into the Phase 1 flight test program. While maneuvering the airplane at 2,500 feet above ground level through a series of turns, the pilot noticed the control stick force increase, and then he heard a bang. Following the bang, the pilot had no aileron control authority. The pilot maintained some control through rudder inputs and executed a forced landing to a field. During the forced landing, the airplane nosed over and came to rest inverted. A postaccident examination revealed one of the aileron cable swages failed due to an improper crimp by the airplane builder.

Full narrative

On August 21, 2011, at 1514 central daylight time, a Hendryx/Wiley Super Rebel experimental amateur-built single-engine airplane, N540AF, sustained substantial damage during a forced landing following an in-flight failure of the aileron cable near La Porte City, Iowa. The private pilot, who was the sole occupant and registered owner, sustained minor injuries. Visual meteorological conditions prevailed, and no flight plan was filed for the 14 Code of Federal Regulations Part 91 personal flight. The flight departed the Nichols Airport, La Porte City, Iowa, approximately 1425.

According to the pilot, the accident flight was the third flight into the Phase 1 flight test program. While maneuvering the airplane at 2,500 feet above ground level through a series of turns, the pilot noticed the control stick force increase, and then he heard a bang. Following the bang sound, the pilot had no aileron control authority. The pilot maintained some control via rudder inputs and executed a forced landing to a field. During the forced landing, the airplane nosed over and came to rest inverted.

A postaccident examination of the airplane revealed the firewall and fuselage were buckled. One of the aileron cable swages failed, which resulted in the loss of aileron authority. According to a Federal Aviation Administration inspector who examined the airplane, the cable swage failed due to an improper crimp. The cable was manufactured by the builder during the airplane build process.

Probable cause

The improper assembly of the aileron cable by the airplane builder. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
330
Wind speed (kt)
8
Temperature (F)
82
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N540AF HENDRYX STEVE/WILEY ROSS SUPER REBEL SUBS 091

Sequence of events

#OccurrencePhase
1 Maneuvering Flight control sys malf/fail defining Climb
2 Emergency descent Collision with terr/obj (non-CFIT) Descent

Findings

Finding
Aircraft-Aircraft systems-Flight control system-Aileron control system-Failure cause
Aircraft-Aircraft systems-Flight control system-Aileron control system-Incorrect service/maintenance cause
Personnel issues-Task performance-Maintenance-Fabrication-Owner/builder cause