N250CH Payne/Foster GLASAIR accident

NTSB ERA11CA471 · 2011-08-24 · Ocala, FL · near OCF

Docket — crew, injuries and powerplant

Summary

According to the pilot, he landed the airplane with a crosswind, and during the rollout the airplane veered to the left, ground looped, and departed the left side of the runway. The right main landing gear became caught in a grassy area, which brought the airplane to rest and resulted in substantial damage to the fuselage. A postaccident examination of the airplane revealed that the tailwheel lock mechanism of the free-castering tailwheel assembly was unable to keep the tailwheel engaged in the locked position. The mechanism that locked the tailwheel assembly in place was not broken; however, the spring of that particular tailwheel assembly kit worked in compression, rather than tension, which resulted in less pressure being applied to the tailwheel lock and greater susceptibility for the tailwheel to unlock during a crosswind landing. Subsequently, when the lock mechanism was moved repetitively, it became dislodged from the notch.

Full narrative

According to the pilot, he landed the amateur-built airplane on runway 18 and during the rollout, it slowly veered to the left. The airplane ground looped and then departed the left side of the runway. The right main landing gear became caught in a grassy area, which brought the airplane to rest and resulted in substantial damage to the fuselage. An examination of the airplane by a Federal Aviation Administration inspector revealed the tailwheel lock mechanism of the free-castering tailwheel assembly was unable to keep the tailwheel engaged in the locked position. The mechanism that locked the tailwheel assembly in place was not broken; however, the spring of that particular tailwheel assembly kit worked in compression, rather than tension, which resulted in less pressure applied to the tailwheel lock and greater susceptibility for the tailwheel to unlock during a crosswind landing. Subsequently, when the inspector moved the lock mechanism repetitively, it became dislodged from the notch. Wind at the airport about the time of the accident was from 110 at 5 knots.

Probable cause

The failure of the tailwheel locking mechanism to remain engaged while landing in a crosswind, which resulted in a loss of directional control and runway excursion. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
110
Wind speed (kt)
5
Temperature (F)
84
Nearest airport
Ocala International Airport
Distance from field
0.0
Airport elevation
90

Aircraft

RegistrationMakeModelDamageFAR part
N250CH PAYNE/FOSTER GLASAIR SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-landing roll Loss of control on ground Cruise
3 Landing-landing roll Runway excursion Cruise
4 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Nose/tail gear strut/axle-Malfunction cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible cause