N5406C accident

NTSB ANC11CA095 · 2011-09-05 · Anchorage, AK · near Z71

Docket — crew, injuries and powerplant

Summary

The pilot was landing his tailwheel-equipped airplane on a dry, gravel runway at the conclusion of a local area flight. After landing, the pilot applied the brakes to slow the airplane, and, while depressing both brake pedals, the left brake pedal unexpectedly went to the floor. The airplane swerved to the right, went off the right side of the runway, and nosed over in an area of soft, marshy, wet tundra, sustaining substantial damage to the rudder, left wing, and left aileron. A postaccident examination revealed that a hydraulic brake supply line fitting near the airplane's fuselage had broken, which resulted in a loss of brake pressure to the left brake. The hydraulic brake line was not secured to the landing gear strut as required, which allowed the line to flex and bend at the fitting during flight. The pilot reported that he recently rebuilt the airplane himself.

Full narrative

The pilot was landing his tailwheel-equipped airplane on a dry, gravel runway at the conclusion of a local area flight. After landing, the pilot applied the brakes to slow the landing roll, and while depressing both brake pedals, the left brake pedal unexpectedly went to the floor, and the airplane swerved to the right. The airplane subsequently went off the right side of the runway and nosed over in an area of soft, marshy, wet tundra, sustaining substantial damage to the rudder, left wing, and left aileron. A Federal Aviation Administration (FAA) airworthiness inspector's postaccident inspection revealed that a hydraulic brake supply line fitting, near the airplane's fuselage, had broken. The FAA inspector noted that the hydraulic brake line was not secured to the landing gear strut as required, which allowed the line to flex and bend at the fitting during flight. The pilot reported the he recently rebuilt the airplane himself.

Probable cause

The fracture of a hydraulic brake line fitting due to incorrect installation of the brake line by the pilot/owner, which resulted in a loss of brake pressure and subsequent loss of directional control during the landing roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
52
Nearest airport
Lake Hood Airstrip
Distance from field
0.0
Airport elevation
73

Aircraft

RegistrationMakeModelDamageFAR part
N5406C — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-landing roll Loss of control on ground Cruise
3 Landing-landing roll Runway excursion Cruise
4 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Brake-Malfunction cause
Personnel issues-Task performance-Maintenance-Repair-Owner/builder cause