N99FJ Robinson Helicopter R44 accident

NTSB CEN11CA627 · 2011-08-26 · Batesville, TX

Docket — crew, injuries and powerplant

Summary

According to the pilot, the helicopter was positioned on a trailer with clamps and blade holders. He stated that, during the preflight inspection, he forgot to remove the clamp that held the left skid to the trailer. During takeoff, the tie-down clamp did not give way and the helicopter experienced a dynamic rollover. The helicopter rolled to the left and impacted the ground, where it sustained structural damage.

Full narrative

According to the pilot, the helicopter was positioned on a trailer with clamps and blade holders. The pilot added that during the preflight inspection, he forgot to remove the clamp, which held the left skid to the trailer. During takeoff, the tie-down clamp did not give way and the helicopter encountered dynamic rollover. The helicopter rolled to the left and impacted the ground. Postaccident examination of the wreckage revealed structural damage to the helicopter.

Probable cause

The pilot’s inadequate preflight inspection that failed to ensure all tie-down clamps were removed prior to takeoff, which resulted in the helicopter’s dynamic rollover. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
900
Visibility (sm)
10
Wind direction
50
Wind speed (kt)
4
Temperature (F)
73
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N99FJ ROBINSON HELICOPTER R44 SUBS 091

Sequence of events

#OccurrencePhase
1 Prior to flight Miscellaneous/other Standing
2 Takeoff Dynamic rollover defining Takeoff
3 Takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Aircraft-Aircraft handling/service-Parking/securing-Tie-down/mooring-Not specified factor
Personnel issues-Task performance-Inspection-Preflight inspection-Pilot cause