N5693C accident

NTSB ERA12CA215 · 2012-03-06 · Mooresville, NC · near NC30

Docket — crew, injuries and powerplant

Summary

The pilot reported that during the landing roll, the left rudder pedal suddenly "went slack" and moved forward to the firewall. He was unable to use the wheel brakes, and the tail slowly yawed to the left. The airplane skidded, the main landing gear failed, and the airplane came to a stop on the turf runway with substantial damage to the left wing and fuselage. Postaccident examination revealed that the left rudder cable turnbuckle was disconnected and its safety wire was broken. The threads of the cable rod end were not stripped. The last annual inspection on the airframe was completed about 5 months before the accident.

Full narrative

The pilot reported that, during the landing rollout, the left rudder pedal suddenly "went slack" and went forward to the firewall. He was unable to use the wheel brakes, and the tail slowly yawed to the left. The airplane skidded, the main landing gear failed, and the airplane came to a stop on the turf runway. An inspector with the Federal Aviation Administration inspected the wreckage and confirmed substantial damage to the left wing and fuselage. The pilot reported, and the FAA inspector confirmed, that the left rudder cable turnbuckle was found disconnected its safety wire was broken. The threads of the cable rod end were not stripped. The last annual inspection on the airframe occurred about five months prior to the accident.

Probable cause

The separation of the left rudder cable turnbuckle and the pilot’s subsequent loss of directional control during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
45
Nearest airport
Miller Air Park
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N5693C — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Flight control sys malf/fail defining Cruise
2 Landing-landing roll Loss of control on ground Cruise
3 Landing-landing roll Landing gear collapse Cruise

Findings

Finding
Aircraft-Aircraft systems-Flight control system-Rudder control system-Malfunction cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot factor