N5649B accident

NTSB WPR12CA137 · 2012-03-14 · Caldwell, ID · near EUL

Docket — crew, injuries and powerplant

Summary

The pilot stated that, before starting the engine by manually rotating the propeller, he set the brakes, throttle, and trim. He exited the airplane and proceeded to rotate the propeller. When the engine started, it went to full rpm, and the airplane started to move forward on the taxiway at a high speed. The airplane veered off the taxiway and continued its high speed taxi until it impacted a hangar door, damaging the engine, both wings, and the right main landing gear. The pilot reported that he had not chocked the airplane and thought the brake was set. He further reported there were no mechanical problems with the airplane.

Full narrative

The pilot stated that prior to starting the engine by manually rotating the propeller, he set the bakes, throttle, and trim. He exited the airplane, and proceeded to rotate the propeller. When the engine started, it went to full rpm and the airplane started to move forward on the taxiway at a high speed. The airplane veered off the taxiway and continued its high speed taxi until it impacted a hangar door, damaging the engine, both wings, and the right main landing gear. The pilot reported to the responding officer that he had not chocked the airplane and thought the brake was set. He further reported there were no mechanical problems with the airplane.

Probable cause

The pilot did not properly secure the airplane before starting the engine by manually rotating the propeller, which resulted in the inadvertent movement of the airplane. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Nearest airport
Caldwell Industrial Airport
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N5649B — — SUBS 091

Sequence of events

#OccurrencePhase
1 Standing-engine(s) start-up Ground handling event defining Standing
2 Standing-engine(s) start-up Loss of control on ground Standing

Findings

Finding
Aircraft-Aircraft handling/service-Parking/securing-Tie-down/mooring-Incorrect use/operation cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause