N840JC Rockwell International 690C accident

NTSB WPR12CA145 · 2012-03-23 · Conrad, MT · near S01

Docket — crew, injuries and powerplant

Summary

The pilot, who was executing a global positioning system approach to a non-controlled airport, saw a snowplow clearing snow from the runway as he broke out of the overcast in a light snow shower. Soon after the pilot spotted the snowplow, it exited the runway, and the pilot continued his approach/landing sequence. After touchdown, the airplane encountered an area of ice and slush on the runway and began to slide. The pilot stated that he should have initiated a go-around, but the airplane was never sufficiently realigned with the runway so he could safely apply go-around power. As the pilot continued his efforts to realign the airplane with the runway, the airplane departed the side of the runway and impacted a natural gas line warning sign. The impact with the sign resulted in a tear in the stressed skin of the fuselage that exceeded eight inches in length. The pilot did not report any mechanical malfunction during the accident sequence.

Full narrative

The pilot, who was executing a Global Positioning System approach to a non-controlled airport with an unmonitored Common Traffic Advisory Frequency, saw a snowplow clearing snow from the runway as he broke out of the overcast in a light snow shower. Soon after the pilot spotted the snowplow, it exited the runway, and he continued his approach/landing sequence. After touchdown, the airplane began to slide when it encountered an area of ice and slush that still remained on the runway surface. Although the pilot decided he should initiate a go-around, he was never sufficiently realigned with the runway to feel that he could safely apply go-around power. As the pilot continued his efforts to realign the airplane, it departed the side of the runway, and prior to coming to a stop it impacted a natural gas line warning sign. The impact with the sign resulted in a tear in the stressed skin of the fuselage that exceeded eight inches in length. The pilot did not report any mechanical malfunction associated with the accident sequence.

Probable cause

The pilot did not maintain directional control of the airplane due to ice and slushy snow on the runway during the landing roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Instrument Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
1500
Visibility (sm)
2
Wind direction
350
Wind speed (kt)
4
Nearest airport
Conrad Airport
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N840JC ROCKWELL INTERNATIONAL 690C SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise
2 Landing-landing roll Runway excursion Cruise
3 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Environmental issues-Physical environment-Runway/land/takeoff/taxi surfa-Snow/slush/ice covered-Contributed to outcome factor