N912FL accident

NTSB CEN12CA205 · 2012-03-25 · Viola, AR

Docket — crew, injuries and powerplant

Summary

The pilot and passenger were on a local flight, when the pilot decided to land in a farm field. According to the pilot, during the landing, the airplane bounced three times, so he applied power to perform a go-around. The pilot added that the engine was at full power; however, the airplane stalled, clipped treetops, impacted the ground, and came to rest inverted, sustaining substantial damage to the fuselage. The pilot stated that there were no preimpact problems with the airplane.

Full narrative

The pilot and passenger were on a local flight, when the pilot decided to land in a farm field. According to the pilot, during the landing, the airplane bounced three times, so he applied power to do a go-around. The pilot added that the engine was at full power; however, the airplane stalled, and then clipped tree tops before impacting the ground. The airplane came to rest in the inverted position. The pilot added there were no preimpact problems with the airplane prior to the collision with the trees. Examination of the airplane by a Federal Aviation Administration (FAA) inspector revealed substantial damage to the fuselage.

Probable cause

The pilot did not maintain adequate airspeed during a go-around, which resulted in an aerodynamic stall. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
320
Wind speed (kt)
3
Temperature (F)
81
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N912FL — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Abnormal runway contact defining Cruise
2 Takeoff Aerodynamic stall/spin Takeoff
3 Uncontrolled descent Collision with terr/obj (non-CFIT) Descent

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Airspeed-Not attained/maintained cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause