N4844M accident

NTSB CEN12CA468 · 2012-07-20 · Neilsville, WI · near VIQ

Docket — crew, injuries and powerplant

Summary

After touching down, the pilot noticed that the airplane was not aligned with the runway and decided to abort the landing. The airplane turned left of the runway toward a cornfield, and the pilot applied power and pulled up. The airplane stalled and collided with the cornfield. The airplane sustained substantial damage to the fuselage, an engine mount, the wing struts, and the left wing spar. The pilot reported there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Full narrative

During an aborted landing, the airplane stalled and collided with a cornfield to the left of the runway. The airplane sustained substantial damage to the fuselage, an engine mount, the wing struts, and the left wing spar. The pilot reported there were no mechanical deficiencies prior to the accident.

Probable cause

The pilot did not maintain control of the airplane during an attempted aborted landing, which resulted in an inadvertent stall. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
120
Wind speed (kt)
3
Temperature (F)
75
Nearest airport
Neillsville
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N4844M — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Abnormal runway contact Cruise
2 Landing-aborted after touchdown Loss of control on ground defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause