N68564 Bellanca 7GCBC accident

NTSB CEN12LA556 · 2012-08-19 · Sidney, NE · near KSNY

Docket — crew, injuries and powerplant

Summary

The pilot made a normal landing in light and variable wind. As the airplane slowed, it started turning to the right, and the pilot applied left rudder and brake to correct for the right turn. The airplane’s tail came up, the propeller struck the ground, and the airplane nosed over. The pilot reported that when he rotated the airplane’s tires after the accident, the left tire turned freely but the right tire would only turn with pressure. However, when the airport manager (who was also a licensed airframe and powerplant mechanic) and local law enforcement officials examined the brake system after the accident, the wheels both spun normally. Additionally, after the airplane was placed back on its landing gear and towed to a hanger, the airplane’s wheels rolled normally. Postaccident examination revealed no evidence of a mechanical malfunction or failure that would have precluded normal operation of the wheels or brake system.

Full narrative

On August 19, 2012, about 1630 mountain daylight time, a Bellanca 7GCBC, N68564, nosed over on landing at Sidney Municipal Airport (KSNY), Sidney, Nebraska. The pilot and pilot-rated passenger were not injured. The airplane was substantially damaged. The airplane was registered to and operated by a private individual under the provisions of 14 Code of Federal Regulations Part 91 as a personal flight. Visual meteorological conditions prevailed at the time of the accident, and no flight plan had been filed. The cross-country flight originated from the Hanging L Ranch Airstrip, Mullen, Nebraska, at 1510.

According to the pilot's accident report, he made a normal landing on runway 02 (4,700 ft. x 75 ft., turf) in light and variable winds. As the airplane slowed, it started turning to the right and the pilot applied left rudder and brake to prevent a ground loop. The tail came up, the propeller struck the ground, and the airplane nosed over. The vertical stabilizer was crushed.

The pilot said that after the accident, while the airplane was still upside down, he rotated the tires. The left tire turned freely but the right tire dragged and would only turn with pressure. Asked if he had any safety recommendations, the pilot wrote that extra practice in the use of brakes and rudder might help to manage the double puck, big tires, and extended landing gear on this airplane.

The Federal Aviation Administration contacted the Sidney Airport manager, also a licensed A&P (airframe and powerplant) mechanic, to determine the condition of the brake system. He reported that the wheels both spun normally prior to putting the aircraft back on it's landing gear. In addition, police officers on the scene also spun the wheels and found no issues. The airport manager also stated that the aircraft was towed to a hanger and it rolled normally. He found no indication of a mechanical failure of the wheels or brake system.

Probable cause

The pilot's misuse of the brakes during landing, which resulted in the airplane nosing over. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Nearest airport
Sidney Municipal/Lloyd W. Carr
Distance from field
0.0
Airport elevation
4313

Aircraft

RegistrationMakeModelDamageFAR part
N68564 Bellanca 7GCBC SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Nose over/nose down defining Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Brake-Incorrect use/operation cause
Personnel issues-Action/decision-Action-Incorrect action performance-Pilot cause