N26490 accident

NTSB ERA12LA518 · 2012-08-16 · Worton, MD

Docket — crew, injuries and powerplant

Summary

The flight instructor reported that the student pilot's approach to a turf runway in the vintage biplane was normal; however, the landing flare was high and the touchdown was firm. After touchdown, the right main landing gear upper strut arm separated, which resulted in a collapse of the right main landing gear. Metallurgical examination of the fractured upper strut arm revealed the tube was buckled and bent and had fracture features consistent with overstress and bending of the tube in one direction. No evidence of preexisting cracking or fatigue was noted.

Full narrative

On August 16, 2012, about 1430 eastern daylight time, a Meyers OTW-160, N26490, operated by a private individual, was substantially damaged during a landing gear collapse, while landing at a private airstrip in Worton, Maryland. The certified flight instructor (CFI) and student pilot were not injured. The instructional flight was conducted under the provisions of 14 Code of Federal Regulations Part 91. Visual meteorological conditions prevailed and no flight plan was filed for the flight that departed Wright Field (MD11), Chestertown, Maryland, about 1420.

The CFI reported that after fueling at MD11, they flew back to the student pilot's home airstrip to practice landings. The student pilot's approach to the turf runway was normal; however, the flare was "slightly high" and the touchdown was "slightly firm." After touchdown, the right main landing gear upper strut arm separated, which resulted in a collapse of the right main landing gear. The right wing subsequently impacted the ground and the airplane nosed over, coming to rest in a vertical position on the runway. The CFI further stated that there appeared to be a preexisting crack on the right main landing gear upper strut arm, and that paint had hid the crack from visual inspection.

Examination of the wreckage by a Federal Aviation Administration inspector revealed substantial damage to the fuselage. The inspector retained the fractured upper strut arm and forwarded it to the NTSB Materials Laboratory, Washington, DC, for further examination.

Metallurgical examination of the fractured upper strut arm revealed the tube was buckled and bent and had fracture features consistent with overstress and bending of the tube in one direction. No evidence of preexisting cracks or fatigue was noted.

The winds were reported as calm during the time of the accident.

Probable cause

The student pilot's improper landing flare and the flight instructor's inadequate remedial action, which resulted in a hard landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
7
Wind direction
0
Temperature (F)
84
Nearest airport
Private Airstrip
Distance from field
0.0
Airport elevation
70

Aircraft

RegistrationMakeModelDamageFAR part
N26490 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Hard landing defining Cruise
2 Landing-flare/touchdown Abnormal runway contact Cruise
3 Landing-flare/touchdown Landing gear collapse Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Student pilot cause
Personnel issues-Action/decision-Action-Lack of action-Instructor/check pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Landing flare-Not attained/maintained cause