N107BW Blumer CHALLENGER II SPEC accident

NTSB WPR13LA134 · 2013-02-26 · Peoria, AZ · near P48

Docket — crew, injuries and powerplant

Summary

The pilot reported that he was practicing touch-and-go landings. The airplane's engine lost power while on the base leg of the traffic pattern, and the pilot decided to land on a dirt road. He landed uneventfully, but a wing collided with a road sign during the landing roll. The airplane spun off the road into desert terrain and sustained substantial damage to the wing and fuselage. Postaccident examination of the engine revealed a cracked cooling fan housing that likely resulted in misalignment of the magnets in the ignition system, which led to an ignition failure and loss of engine power. The fan housing was not a manufacturer-supplied part.

Full narrative

On February 26, 2013, about 0930 mountain standard time, an experimental Blumer (Quad City) Challenger II, N107BW, collided with a sign during an off field landing on a road near Peoria, Arizona. The pilot/owner was operating the airplane under the provisions of 14 Code of Federal Regulations (CFR) Part 91. The private pilot and one passenger were not injured; the airplane sustained substantial damage. The local personal flight departed Pleasant Valley Airport in Peoria about 0910. Visual meteorological conditions prevailed, and no flight plan had been filed.

The pilot reported that he was practicing touch-and-go landings. On the base leg, the engine lost power, and he decided to land on a dirt road. He landed uneventfully, but a wing collided with a road sign during the landing roll. The airplane spun off the road into desert terrain, and sustained substantial damage to the wing and fuselage.

The engine was a Rotax 503, serial number 4298279. A Federal Aviation Administration (FAA) inspector oversaw examination of the engine. He discovered a cracked cooling fan housing that he believed resulted in misalignment of the magnets in the ignition system, and thus an ignition failure and loss of engine power. The fan housing was not a Rotax part.

No Service Difficulty Reports (SDR) were found on file with the FAA regarding the cooling fan.

Probable cause

A cracked cooling fan housing, which led to a malfunction of the ignition system and a loss of engine power during the landing approach. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
30
Wind speed (kt)
3
Temperature (F)
50
Nearest airport
Pleasant Valley
Distance from field
1.0
Airport elevation
1600

Aircraft

RegistrationMakeModelDamageFAR part
N107BW BLUMER CHALLENGER II SPEC SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR pattern base Loss of engine power (total) defining Cruise
2 Landing-landing roll Off-field or emergency landing Cruise
3 Landing-landing roll Collision during takeoff/land Cruise

Findings

Finding
Aircraft-Aircraft power plant-Ignition system-Ignition power supply-Damaged/degraded cause
Environmental issues-Physical environment-Object/animal/substance-Sign/marker-Contributed to outcome factor