N56464 accident

NTSB ANC13LA049 · 2013-05-19 · Big Lake, AK · near Z40

Docket — crew, injuries and powerplant

Summary

The pilot was practicing stop-and-go landings on the gravel-covered runway. Upon touchdown, the right main gear separated at the axle housing, which pivoted the airplane to the right as the main landing gear leg dug into the runway. The airplane subsequently nosed down and came to rest on the propeller spinner and left wing. The airplane sustained substantial damage to the left wing and lift struts. A postaccident examination revealed that the right main landing gear axle separated at the axle housing and main landing gear leg attachment point. Visual and magnified optical examinations of the fractured surfaces revealed features consistent with a bending overstress fracture, indicating that the pilot most likely executed a hard landing, which resulted in the fracture of the right main axle housing and the subsequent nosedown.

Full narrative

On May 19, 2013, about 1130 Alaska daylight time, a tundra-tire and tailwheel-equipped Maule M-6-235 airplane, N56464, sustained substantial damage while landing at the Goose Bay Airport, about 9 miles south of Big Lake, Alaska. The airplane was being operated by the pilot as a visual flight rules (VFR) personal flight under the provisions of Title 14, CFR Part 91, when the accident occurred. The airline transport pilot was not injured. Visual meteorological conditions prevailed and a VFR military flight plan had been filed. The flight departed Elmendorf Air Force Base about 0830.

During a telephone conversation with the National Transportation Safety Board investigator-in-charge (NTSB) on May 19, the pilot stated that he was practicing stop-and-go landings on the gravel covered runway at the Goose Bay Airport. Upon touchdown, the right main gear separated at the axle housing, which pivoted the airplane to the right as the main landing gear leg dug into the gravel covered runway. The airplane subsequently nosed down, coming to rest on the propeller spinner and left wing. The airplane sustained substantial damage to the left wing and lift struts. The pilot noted that the airplane was equipped with 35-inch tundra tires.

A postaccident examination, by the pilot, revealed the right main landing gear axle separated at the axle housing to main landing gear leg attach point.

A Senior Safety Board Metallurgist reported that visual and magnified optical examination of the fractured surfaces revealed features consistent with a bending overstress fracture. (A synopsis of the NTSB Metallurgist's case review is included in the public docket for this accident.)

Probable cause

The pilot’s execution of a hard landing, which resulted in the overstress fracture of the right main axle housing and the subsequent nosedown. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
320
Wind speed (kt)
6
Temperature (F)
41
Nearest airport
Goose Bay
Distance from field
0.0
Airport elevation
78

Aircraft

RegistrationMakeModelDamageFAR part
N56464 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Hard landing defining Cruise
2 Landing-flare/touchdown Landing gear collapse Cruise
3 Landing-landing roll Nose over/nose down Cruise
4 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Main gear strut/axle/truck-Capability exceeded factor