N199 accident

NTSB WPR13CA273 · 2013-06-16 · Coolin, ID · near 66S

Docket — crew, injuries and powerplant

Summary

The pilot reported that prior to arrival at the airport he received a calm wind report from a nearby airport. After turning right base for landing, he realized that he was too close in to the runway, so he reduced the power to idle, turned a 0.5-nautical-mile final approach, and added three notches of flaps. Prior to touchdown, he realized that he was running out of runway, and that it was too late to go around due to obstacles (trees) at the end of the runway. The airplane subsequently touched down, and the pilot retracted the flaps, turned off the ignition, and applied the brakes. The pilot tried to ground loop the airplane, but the landing gear struck one of the horizontal log railings at the end of the runway. The airplane bounced onto and skidded across an asphalt road and into some scrub brush and saplings. The left wing and all three landing gear separated. The pilot stated that there were no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Full narrative

The pilot reported that prior to arrival at the airport he received a calm wind report from a nearby airport. After turning right base for landing, he realized that he was too close in to the runway, so he reduced the power to idle, turned a 0.5-nautical-mile final approach, and added three notches of flaps. Prior to touchdown, he realized that he was running out of runway, and that it was too late to go around due to obstacles (trees) at the end of the runway. The airplane subsequently touched down, and the pilot retracted the flaps, turned off the ignition, and applied the brakes. The pilot tried to ground loop the airplane, but the landing gear struck one of the horizontal log railings at the end of the runway. The airplane bounced onto and skidded across an asphalt road and into some scrub brush and saplings. The left wing and all three landing gear separated. The pilot stated that there were no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to maintain an adequate glide path, which led to a runway excursion and collision with objects. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
130
Wind speed (kt)
4
Temperature (F)
81
Nearest airport
Cavanaugh Bay Airport
Distance from field
0.0
Airport elevation
2484

Aircraft

RegistrationMakeModelDamageFAR part
N199 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Landing area overshoot defining Cruise
2 Landing Runway excursion Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent/approach/glide path-Not attained/maintained cause
Environmental issues-Physical environment-Object/animal/substance-Tree(s)-Awareness of condition factor