N272EF accident

NTSB WPR13LA319 · 2013-07-04 · Phoenix, AZ · near IWA

Docket — crew, injuries and powerplant

Summary

The pilot reported that, when he put the landing gear handle down, the left main landing gear did not indicate that it was locked. He cycled the landing gear several times in an attempt to get it down and locked before landing. During the landing, the left main landing gear collapsed, and the left horizontal stabilizer and elevator were substantially damaged. Disassembly of the left main landing gear actuator revealed that a gear tooth from the piston assembly had broken off, which prevented the left main landing gear from locking in the down position. The reason for the gear tooth failure could not be determined.

Full narrative

On July 3, 2013, about 2000 mountain standard time, a Cessna T210K, N272EF, sustained substantial damage when the left main landing gear collapsed while on landing roll at Phoenix-Mesa Gateway Airport, Phoenix, Arizona. The private pilot, the sole occupant of the airplane, was not injured. The pilot/owner was operating the airplane under the provisions of 14 Code of Federal Regulations Part 91. Visual meteorological conditions prevailed for the personal cross-country flight, which had originated at 1825 from Falcon Field Airport, Mesa, Arizona. A flight plan had not been filed.

The pilot reported that he had put the landing gear down, but the left main landing gear down-and-locked light did not indicate that it was safely locked. After several attempts to get the left main landing gear safely down and locked, the pilot landed the airplane, and the left main landing gear collapsed. The left horizontal stabilizer and elevator were bent and wrinkled.

In the presence of a Federal Aviation Administration inspector, on August 22, 2013, the left main landing gear actuator assembly was disassembled. A broken gear tooth from the end to the piston assembly was found. This tooth was responsible for the final "down lock" of the left main gear. The assembly operated properly in the "up and locked" position, which the pilot verified occurred with each cycling of the landing gear. The failed tooth was not made available for further examination and the failure mode was not determined.

Probable cause

The collapse of the left main landing gear due to a broken gear tooth in the landing gear actuator. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Dusk
Sky condition
BKN
Ceiling (ft)
23000
Visibility (sm)
10
Wind direction
260
Wind speed (kt)
6
Temperature (F)
106
Nearest airport
Phoenix-Mesa Gateway Airport
Distance from field
1.0
Airport elevation
1384

Aircraft

RegistrationMakeModelDamageFAR part
N272EF — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Landing gear collapse defining Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Landing gear actuator-Failure cause