N4249Z accident

NTSB WPR13CA339 · 2013-07-25 · Challis, ID · near LLJ

Docket — crew, injuries and powerplant

Summary

The pilot reported that during the takeoff roll to the south he became distracted by a helicopter operation at the south end of the airport. It was about this time that he noticed the airplane yaw, which he over corrected for. The airplane subsequently departed the right side of the runway, then swerved back to the left. The right wing and right elevator impacted the ground and were substantially damaged. The pilot reported no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Full narrative

The pilot reported that during the takeoff roll to the south he became distracted by a helicopter operation at the south end of the airport. It was about this time that he noticed the airplane yaw, which he over corrected for. The airplane subsequently departed the right side of the runway, then swerved back to the left. The right wing and right elevator impacted the ground and were substantially damaged. The pilot reported no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot's failure to maintain directional control during the takeoff roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
40
Wind speed (kt)
3
Temperature (F)
79
Nearest airport
Challis Airport
Distance from field
0.0
Airport elevation
5072

Aircraft

RegistrationMakeModelDamageFAR part
N4249Z — — SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Loss of control on ground defining Takeoff
2 Takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause