N368ES accident

NTSB CEN13CA529 · 2013-09-04 · Council Bluff, IA · near KCBF

Docket — crew, injuries and powerplant

Summary

According to the student pilot, the wind was 130 degrees at 6 knots and he planned on departing runway 14. During the takeoff roll the airplane drifted right, the pilot corrected the drift by using the rudder pedals. The airplane then lifted off from the runway, yawed left, and settled back on the ground. The airplane exited the right side of the runway and went through a grass median before coming to a stop. Examination of the airplane revealed substantial damage to the fuselage's firewall. The pilot reported no mechanical anomalies that would have precluded normal operation.

Full narrative

According to the student pilot, the wind was 130 degrees at 6 knots and he planned on departing runway 14. During the takeoff roll the airplane drifted right, the pilot corrected the drift by using the rudder pedals. The airplane then lifted off from the runway, yawed left, and settled back on the ground. The airplane exited the right side of the runway and went through a grass median before coming to a stop. Examination of the airplane revealed substantial damage to the fuselage's firewall. The pilot reported no mechanical anomalies that would have precluded normal operation.

Probable cause

The student pilot's loss of directional control during takeoff. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
140
Wind speed (kt)
3
Temperature (F)
68
Nearest airport
Council Bluffs Municipal
Distance from field
0.0
Airport elevation
1253

Aircraft

RegistrationMakeModelDamageFAR part
N368ES — — SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Loss of control on ground defining Takeoff
2 Takeoff Runway excursion Takeoff

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause