N2443C accident

NTSB WPR14CA200 · 2014-05-21 · Cameron Park, CA · near O61

Docket — crew, injuries and powerplant

Summary

The solo pilot was doing stop and go landings and takeoffs in the tailwheel-equipped airplane to become current. During the fourth landing, the pilot lost directional control, and the airplane ground-looped. During the ground-loop, the pilot applied excessive brake, and the airplane nosed over. The airplane sustained substantial damage to the vertical stabilizer and the rudder. The pilot reported no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Full narrative

The solo pilot was doing stop and go landings and takeoffs in the tailwheel-equipped airplane to become current. During the fourth landing, the pilot lost directional control, and the airplane ground-looped. During the ground-loop, the pilot applied excessive brake, and the airplane nosed over. The airplane sustained substantial damage to the vertical stabilizer and the rudder. The pilot reported no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot's failure to maintain directional control during landing which resulted in a ground-loop and nose over. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
230
Wind speed (kt)
5
Temperature (F)
77
Nearest airport
CAMERON AIRPARK
Distance from field
0.0
Airport elevation
1287

Aircraft

RegistrationMakeModelDamageFAR part
N2443C — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise
2 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause